Updated 2017-08-22 09:07:53 by ccbbaa

Reinhard Max - 2005-09-12

This piece of code can be added to any Tcl application to allow remote access from tkcon (or even telnet or netcat). To open the debugging socket, call
 tkconclient::start port ?myaddr?

The default value for myaddr is localhost. Applications that want to use this code need to run the Tcl event loop. When a remote connection exists, [puts] output to stdout and stderr is redirected to the socket.

The code doesn't currently support concurrent client connections. Subsequent connection attempts are rejected if a connection is established already.

If the remote access capability isn't needed anymore, the command tkconclient::stop can be used to shut down the server socket, and the current client connection if there exists one. To shut down a client connection from the remote side, the word bye can be sent as a pseudo-command.

There is currently no access control to the socket!, so care must be taken, especially when opening debugging connections on a publically accessible interface.
 # save this file as tkconclient.tcl then also save pkgIndex.tcl from lower on this page +abc
 package require Tk                  ;# can also run under tclsh with vwait event loop   +abc
 package provide tkconclient 0.1     ;# bogus version number                             +abc 20.08.2017

 namespace eval tkconclient {
    variable script ""
    variable server ""
    variable socket ""
    namespace export start stop
    proc start {port {myaddr localhost}} {
        variable socket
        variable server
        if {$socket ne "" || $server ne ""} stop
        set server [socket -server [namespace current]::accept \
                        -myaddr $myaddr $port]
    }
    proc stop {} {
        variable server
        if {$server ne ""} {
            closesocket
            close $server
            set server ""
        }
    }
    proc closesocket {} {
        variable socket
        catch {close $socket}
        set socket ""
        # Restore [puts]
        rename ::puts ""
        rename [namespace current]::puts ::puts
    }
    proc accept {sock host port} {
        variable socket
        fconfigure $sock -blocking 0 -buffering none
        if {$socket ne ""} {
            puts $sock "Only one connection at a time, please!"
            close $sock
        } else {
            set socket $sock
            fileevent $sock readable [namespace current]::handle
            # Redirect [puts]
            rename ::puts [namespace current]::puts
            interp alias {} ::puts {} [namespace current]::_puts
        }
    }
    proc handle {} {
        variable script
        variable socket
        if {[eof $socket]} {
            closesocket
            return
        }
        if {![catch {read $socket} chunk]} {
            if {$chunk eq "bye\n"} {
                puts $socket "Bye!"
                closesocket
                return
            }
            append script $chunk
            if {[info complete $script]} {
                catch {uplevel "#0" $script} result
                if {$result ne ""} {
                    puts $socket $result
                }
                set script ""
            }
        } else {
            closesocket
        }
    }
    ## This procedure is partially borrowed from tkcon
    proc _puts args {
        variable socket
        set len [llength $args]
        foreach {arg1 arg2 arg3} $args { break }
    
        switch $len {
            1 {
                puts $socket $arg1
            }
            2 {
                switch -- $arg1 {
                    -nonewline - stdout - stderr {
                        puts $socket $arg2
                    }
                    default {
                        set len 0
                    }
                }
            }
            3 {
                if {$arg1 eq "-nonewline" &&
                    ($arg2 eq "stdout" || $arg2 eq "stderr")} {
                    puts $socket $arg3
                } elseif {($arg1 eq "stdout" || $arg1 eq "stderr") \
                              && $arg3 eq "-nonewline"} {
                    puts $socket $arg2
                } else {
                    set len 0
                }
            }
            default {
                set len 0
            }
        }
        ## $len == 0 means it wasn't handled above.
        if {$len == 0} {
            global errorCode errorInfo
            if {[catch [linsert $args 0 puts] msg]} {
                regsub tkcon_tcl_puts $msg puts msg
                regsub -all tkcon_tcl_puts $errorInfo puts errorInfo
                return -code error $msg
            }
            return $msg
        }
    }
 }

ccbbaa - 2017-08-20
 + Edit by abc: nick change abc->ccbbaa ; reason: abc is not searchable

Since a complete tkconclient package could only be found in androwish (!) I edited the wiki to add the key headers above at +abc and the pkgIndex.tcl here.
 # save this file as pkgIndex.tcl ; copy this file and tkconclient.tcl to [::tcl::pkgconfig get libdir,install]/tkconclient
 # pkgIndex file for tkconclient; bogus version number 0.1
 if { ![package vsatisfies [package provide Tcl] 8.4] } { return }
 package ifneeded tkconclient 0.1 [list source [file join $dir tkconclient.tcl]]

The following code is due to chw and his androwish examples. tkconclient is in androwish. To add a tkconclient to any tcl or tk program:

Note: rememeber to enter the event loop using a vwait in tclsh - not needed in wish Important: place this code at the 'end' of the 'main' code in your program, since it must be followed by the vwait in a tclsh program. In wish the event loop runs always and the placement is less important. tkconclient runs asynchronously to the program and all interesting aspects of the running program are accessible in real time. The usefulness of this remote console for tclsh programs is debatable, excepting in embedded and headless / remote machines where there is no other way to debug a running tclsh program.

Note2: there should be some minimal security check, at least that one is on the home network
set ::TkconDebugSocket 12345

if {[info exists ::TkconDebugSocket]} {
  package require tkconclient
  tkconclient::start $::TkconDebugSocket
}

Use:

$ telnet 7.8.9.1 12345

puts $tcl_version; FooUserProc ;# any tcl commands

There is no prompt '#'. Do not paste large pieces of tcl into the terminal without checking the outcome. The tclsh/wish underlying tkconclient reports tcl errors, syntax, etc., as usual, but it can be brought into a nonresponsive state. In that case, only stopping the tcl program and restarting it helps. To stop the remote tcl program simply issue exit. To disable the remote tkconclient socket without exiting the tcl program issue tkconclient::stop. The remote tcl program continues running, but subsequent socket telnet / Tkcon connections are not possible. The original Tkcon gui client can also be used instead of telnet, of course.

KPV Very cool, I'd not known about this page. It uses some obscure tkcon features which I'm sure many people aren't familiar with. So here's some explicit instructions on how to use this package.

In program you want to be able to debug remotely:

  • load this package either by source tkconclient.tcl or, if you've done the setup described above, package require tkconclient
  • somewhere in your code add, tkconclient::start 9876

Now to remotely control this program:

  • start tkcon
  • click menu Console -> Attach to... -> Socket -> Create Connection
  • enter localhost and 9876

Now everything you type in the tkcon console is sent to your program and it's output is displayed on console.