Updated 2018-06-29 05:38:00 by bll

Tcl for Beginners, is another introduction to Tcl

See Also  edit

Dodekalogue
foreach
A simple and powerful command that is used extremely often
gotcha
Why can I not place unmatched braces in Tcl comments

Tcl is All about Commands  edit

Tcl works by processing commands. In this regard, it's similar to an operating system shell like DOS or bash. Each line of a Tcl script is a command, and the first word of each line is the name of the command, and any other words are arguments for the command. Tcl looks up the code associated with that name and invokes it.

In DOS, for example, to list the contents of a directory you would type:
dir c:\path\to\folder

in Tcl you would write:
glob /path/to/folder/*

glob is a Tcl command, and has a purpose analogus to the dir command in MS-DOS.

Commands are Made of Words  edit

Another useful command is puts, which, like the echo command in MS-DOS, prints things out on the screen:
puts Hello

A mnemonic device for puts is put string.

There are commands that interpret words as numbers in order to get some math done, but it's up to each individual command to decide how it wants to treat any particular word. Tcl makes no distinction.

Escaping Interpretation  edit

In
puts Hello

, there are no quotes around Hello. No quotes are needed in Tcl because all words, including the names of commands, are just strings. In fact, in Tcl, every value is a string. Because of this, quotes are not used to signify that something is a string - that's already a given. Instead, quotes, braces, and backslashes are used to take away the special meaning that some characters have. Whitespace normally has a special meaning to Tcl, since it separates words in a command. To include whitespace characters as part of a value, use backslash, braces, quotes to tell Tcl not to see that whitespace as a word delimiter.

set only takes two arguments. Therefore, this code
set foo good afternoon

will result in
error: wrong # args: should be "set varName ?newValue?"

We need to tell Tcl that the space between good and afternoon is part of the value. Here is an example of doing that using backslash, braces, and quotes, repectively:
set foo good\ afternoon 
set foo {good afternoon}
set foo "good afternoon"

Braces and quotes only have this special meaning when they completely enclose a word of a Tcl command. In the middle of a word, they are just regular characters.
puts This"is{a"single}"value

Not even newlines can stop braces:
puts {This is a whole
   paragraph inside braces.  Braces just
   don't quit until the matching closing brace
   is found.  Backslashed \} braces don't close it Off.  Neither
   do "Quotes".  {other matching braces} are OK, too.  But finally,
   we get to the closing brace.
}

Using Variables  edit

Use set to set the value of a variable:
set greeting Hello

To get the value back out of a variable use a dollar sign. For example, to print Hello:
puts $greeting

This works even if there is white space in the greeting:
set greeting {Hello There}
puts $greeting

That's because Tcl substitutes the entire value of the variable into the the spot where $greeting was.

Command Substitution  edit

Variable substitution isn't the only substitution game in town. There's also command substitution. This is done with square brackets. To print Hello to the screen using command substitution:
set greeting Hello
puts [set greeting]

When set only gets one argument instead of two, it returns the value of the variable instead of setting it.

Notice also that we just used the name of the variable without prepending a dollar sign to it. If we had prepended the dollar sign, it would have been equivalent to typing set Hello, in which case set would have gone to find the value of the variable named, "Hello", failed to find it, and returned an error.

Knowing that, you should be able to make sense of the following code:
Set Hello Howdy
set greeting Hello
puts [set $greeting]

What will be printed to the screen? That's right:
Howdy

Extra Credit (not really a beginner thing):
puts [expr $$greeting]

What will be printed? Yes, once again, it's
Howdy

Why? Hint: what does [puts $$] do?

Clif Flynt: When I'm teaching a class, I point out that
set set set

is a valid command, and that
set x set
set y a
set z b
$x $y $z

is a valid Tcl command to assign the value b to variable a. Looking at this makes the students stop and think. And stare at me like I'm crazy.

Commenting Code  edit

Sometimes, particularly when we think we're doing something really clever, we want to add comments to our code so that other humans can make more sense of it. To do this in Tcl, we use the pound character, but only at the beginning of a command:
#puts {This line won't ever happen, because it's commented}
puts Whew!

Using Double Quotes  edit

Braces inhibit variable substitution, command substitution, and most backslash substitution:
set name John

#warning - This next line won't substitute in John.  It just prints exactly
#what is in the braces, including the $.
puts {Hello $name}

When we want those substitutions, but we also need white space to just be white space, we can use double quotes instead of braces. Double quotes have the same purpose as braces, but also allow all substitutions:
set name John
set greeting "Hello, $name!  Hello again, [set name]!" 

As with braces, newlines inside quotes are just newlines:
puts "In double quotes, newlines
    are  just newlines.  If you escape a newline, \
    it disappears entirely.  Braces are just {braces},
    and other \"double quotes\" can be escaped. [
        set value {Command Substitution, which should really be called
        "script substitution"}
        set value
    ], is also not a problem at all.  Notice that there were multiple commands
    in that last command substitution, and the value of the last command is what
    actually takes the place of the entire command substitusion.  It doesn't
    hurt to escape \{braces\}, but it isn't necessary, either.  Escaping regular \letters
    doesn't do anything at all to them.  An \a is just an a.  Finally, we get
    to the closing quote."

Using Backslashes  edit

In addition to variable and command substitution, there is on other substituion device: Backslashes. They are used in Tcl in a manner very similar to that of C/C++. The following are backslash substitutions understood by Tcl:
\a
Audible alert (bell) (0x7)
\b
Backspace (0x8)
\f
Form feed (0xc)
\n
Newline, LF (0xa)
\r
Carriage-return, CR (0xd)
\t
Tab (0x9)
\v
Vertical tab (0xb)

The additional backslash sequences, \x and \u, are some documented in the Dodekalogue. They point to the fact that Tcl is not restricted to 8-bit characters, a limitation of some other languages.

If a \ is followed by up to 3 digits of numbers, than it is treated as an octal value for a character and the actual character is then substituted in its place.

Any other character following a \ is replace with itself. This is an 'escape' mechanism that enables you to make character just be themselves in places where Tcl would normally assign some special meaning to them:
puts "what do we mean when we say, \"word\"?"

If a backslash \ appears at the end of a line, then that line continues on to the next line:
puts \
  "Continued from the line above"

This is to allow a long line of code to be split into multiple lines if you run out of space in your text editor.

Word Expansion  edit

Sometimes we need a way to tell Tcl to consider each word within a word to be an additional argument to a command. For example, if we have a variable that contains two words:
set attribute {name Bob}

The following would result in a four-word command, including the name of the command:
format {%s: %s} {*}$attribute

This is called "word expansion".

It's really All about Commands  edit

The few rules that have just been described constitute the entirety of the Tcl language. Really! That's it. There's nothing more. The description above is a complete description of the Tcl language. There doesn't need to be anything more because those rules are entirely sufficient to create every other programming facility that exists in Tcl.

The only thing you will ever do in Tcl code is form commands. There are no control structures in the syntax because control flow can be, and is, implemented as commands. That's why Tcl really is all about the commands. There are two types of commands which may be considered fundamental: commands that create new commands, i.e., proc, and commands that implement conditional constructs, i.e., if.

Creating New Commmands  edit

proc is used to create new commands.
proc greet {} {
    puts Hello!
}

Commands that have been created this way are called procedures.

To create a procedure that takes an argument:
proc greet name {
    puts "greeting, $name!"
}

To create a procedure that takes multiple arguments:
proc greet {first last} {
    puts "hello, $first $last!"
}

Since proc interprets its second argument as a list, the following works as well, but is not common:
proc greet [list first last] {
    puts "hello, $first $last!"
}

The last command within a procedure is returned as the value of a procedure.
proc combine {part1 part2} {
    set result $part1$part2
}
combine hel lo

The result is:
hello

return can be used to be more explicit. The following example has the same result as the previous one.
proc combine {part1 part2} {
    return $part1$part2
}
combine hel lo

There's a special trick to creating a procedure that takes a variable number of arguments. If the last name in the list of arguments is args, the new procedure can be called with any number of args, and within the procedure, $args will be a list of the extra arguments:
proc greet {greeting args} {
    foreach name $args {
        puts "$greeting, $name!"
    }
}

To create a procedure that can be invoked with any number of arguments, or none at all:
proc count args {
    set length [llength $args]
    if {$length == 0} {
        puts "I was invoked with no arguments"
    } else {
        puts "I was invoked with $length arguments"
    }
}

And it works like that:
% count
I was invoked with no arguments
% count a
I was invoked with 1 arguments
% count a b
I was invoked with 2 arguments

Conditional Constructs  edit

if, a necessary construct in any language, in Tcl is just another command. It takes a word that serves as the condition, and another word that serves as the script to run in the event that the criteria is true:
if {1} {
    puts "1 is always true!"
}

Notice that 1 is braced, even though it wasn't strictly necessary. Why? To advocate good programming habits. Until you learn enought to know exactly when not to, you should always brace your expressions.

Here's another example:
if {0}  {
    Anything at all can go here,
    even syntactically-invalid\{
    stuff, because Tcl will not attempt
    to evaluate this word, as the condition is false.
}

What is a list?  edit

The Tcl language specification doesn't have anything to say about lists, except that some command might interpret words passed to them as various things, including possibly lists. It does specify, however, that a script is a string, and can be broken down into commands, which therefore must also be strings. Commands, in turn, are composed of words. This strongly implies that the syntax of a command must be adequate to express a list. The built-in list commands of Tcl accept a word as a list if and only if the word in turn can be parsed as a Tcl command. In other words, a list is a string that could be interpreted as a command.
set a "A B C"
lindex $a 0

The above commands return :
A B C
A

However, not every string that can be interpreted as a command is a list.
set command {list {*}{one two three}}
lindex $command 0 ;# -> error: list element in braces followed by "{one" instead of space

The meaning of {*} is discussed later.

lindex returns the list element, located at the given index. Indices start at 0.
set a {A B C}
lindex $a 1

result:
B

It's possible for a list to contain another list:
set a "A {B C} D"
lindex $a 1

result:
A {B C} D
B C

Remember that not all strings are lists.

Although split can be used to convert any string into a list of words, that doesn't mean that any value given to split is a well-formed list.

DO  edit

  • Do write lots of comments in your code about what your code does, what you tried that didn't work (and why, if known).
  • Do study the documentation and others' code to understand 'upvar', 'uplevel'.
  • Learn how to use exec so that you can start using Tcl to drive external programs

DON'T  edit

  • Don't have unescaped unmatched brackets ANYWHERE, including comments. Use a text editor that helps you by showing bracket matching.

Getting Stuff Done  edit

  • tcllib is full of useful code. Try to use it as much as possible, a wide use of tcllib really saves time, and it is frequently updated.
  • If you need speed, be aware that Tcl can be extended easily (using C,C++...). Avoid writing your own extensions if existing ones can do the job.
  • Do split your code into different namespaces (and files) when it overcomes ca. a thousand lines.