Updated 2015-09-02 22:30:49 by pooryorick

Theo Verelst

I'm not sure I did a page on pcom already (on second reading it seems not), it is a not so large program I did when I had nothing else then some general use networked computers to work on, where I wanted to exchange files and later on chat, maybe remotely execute commands, and keep it simple and a bit reliable. (here [1] seems to be an early version, probably long before A.D. 2000)

I don't remember what imperfections there are in this version, but it sure can be used for Connecting Tcl/Tk with GNUstep Objective-C programs .

Here is the source code; it's suitable for pretty ancient tcl/tk versions, and does nothing all too freaky, I guess.
# 
# Pcom: a personal communication shell
# by: Theo Verelst ([email protected])
#

# during debug:
#set t [winfo children .]
set t {.f .fl}
foreach i [winfo children .]  {
     if {[winfo toplevel $i] != $i} {
          lappend t $i
     }
}
foreach i $t {destroy $i}
update

set myss -1      ;# my server socket
set rems -1      ;# remote socket
set myip -1      ;# local IP address
set myport 300   ;# default port

set state ready
set allowtcl 1
                      # quite dangerous, a total security loophole...
                      # set to zero when in doubt...
                      # it allows remote command execution
set icanconnect 0

set crdir /
set crpat *
set crdirs {}
set crfiles {}
set cldir /
set clpat *

# I don't think this works anymore..
proc forceclose {{max 30} {from 0} {type sock}} {
    log "forced closed: "
    for {set i 0} {$i <30} {incr i}  {
        set name "$type[expr $from + $i]"
        if {[catch "close $name"] == 0} {
            log " $name"
        }
    }
    log \n
}


proc log {l} {
    if {[winfo exists .tlog]} {
        .tlog insert end $l
        .tlog see end
    } else {
        puts -nonewline "$l"
    }
}

# Incoming lines are parsed based on the first word, the command, 
# and the second 'argument' or the rest of the line, which in some cases 
# gets parsed further.

proc parse_in {in} {
    global state allowtcl
    
 #   set com [lindex $in 0]
    set com [string range $in 0 [expr [string first " " $in] -1] ]
    set rest [string range $in [expr [string first " " $in] +1] end ]
    switch $com \
    {DO_LS} {
        set olddir [pwd]; set dirs {}; set files {}
        set dir [lindex $rest 0]; set pattern [lindex $rest 1]
        if {[catch {cd $dir}] != 0} {
            send "VALUE_LS $dir $pattern [list {non-existent dir} {}]"
            cd $olddir
            log "DO_LS $dir $pattern (Error: non-existent dir)\n"
            return
        }
        puts [pwd]
        foreach i [glob $pattern] {
            if [file exists $i] {
                if [file isdir $i] {
                    lappend dirs $i
                } else {
                    lappend files $i
                }
            }
        }
        send "VALUE_LS $dir $pattern [list $dirs $files]"
        cd $olddir
        log "DO_LS $dir $pattern\n"
    } \
    {DO_TCL} {
        if {$allowtcl != 0} {
            set tcl $rest
            set cr [catch $tcl tclret]
 #         if {$cr == 0} {
 #            if {[info exists tclret] == 0} {set tclret ""}
 #         } else {
 #            set tclret ERROR
 #        }
            log "Tcl executed:\n$tcl\n"
            send "DO_TCLRET $tclret"
        } else {
            log "Tcl command blocked (not allowed):\n$tcl\n"
        }
    } \
    {DO_SETVAR} {
        if {$allowtcl != 0} {
            set tclvar [lindex $rest 0]
            set tclval [lrange $rest 1 end]
            global $tclvar
            eval set $tclvar $tclval
 #         puts $tclvar
            log "Tcl set executed: set $tclvar $tclval\n"
        } else {
            log "Tcl set command blocked (not allowed): set $tclvar $tclval\n"
        }
    } \
    {DO_TCLRET} {
        if {$rest ne ""} {log "Tcl Return value: $rest\n"}
        set state ready
    } \
    {VALUE_LS} {
        global crdir crpat crdirs crfiles
        set crdir   [lindex $rest 0]
        set crpat   [lindex $rest 1]
        set crdirs  [lindex $rest 2]
        set crfiles [lindex $rest 3]
        # puts "$rest\n$crdirs,$crfiles"
        .f.ld del 0 end ; .f.lf del 0 end
        foreach i $crdirs {.f.ld insert end $i}
        foreach i $crfiles {.f.lf insert end $i}
    } \
    {DO_RECFILE} {
        log "(requested: DO_RECFILE $rest)"
        eval receive_file $rest
        send "READY_RECFILE "
        log "READY_RECFILE\n"
    } \
    {DO_SENDFILE} {
        log "(requested: DO_SENDFILE $rest)"
        eval send_file $rest
        send "READY_SENDFILE "
        log "READY_SENDFILE\n"
    } \
    {DO_REQSENDFILE} {
        send "DO_SENDFILE $rest"
        log "DO_SENDFILE $rest\n"
    } \
    {DO_ABORTFILE} {
        catch "close $filess; close $fileso; close $filed"
        log "Aborted file transfer.\n"
    } \
    {DO_CLOSECONTROL} {
        global rems
        disconnect $rems
        set rems -1
        log "Closed control connection.\n"
    } \
    {default} {
        .tcom insert end "REMOTE: $in\n"
        .tcom see end
        set state ready
    }
}

proc serv {sock ip t} {
    global rems remip
    log "client connected, socket $sock, ip adr $ip\n"
    if {$rems != -1} {
        log "client connect attempt while already connected, ignored\n"
        close $sock
        return
    }
    set rems $sock
    set remip $ip
    fileevent $rems readable {
        global rems
        set in [gets $rems]
        parse_in $in
     }
}

proc init {} {
    global myport myip myss

    # figure out ip address before server socket is started
    myip

    # log window
    text .tlog -width 40 -height 4
    pack  .tlog -side bottom -anchor s -expand n -fill both
 
    log "my IP address is $myip.\n"

    # set up a listening socket
    catch {set myss [socket -server serv $myport]}
    if {$myss != -1} {
        log "listening with $myss at port $myport\n"
    } else {
        log "server socket already in use, use active connect.\n"
    }
 
    log "Init OK.\n"
}

proc tserv {sock ip t} {   # simply to figure out IP address
    global ts
    set ts $sock
}

proc myip {{port 302}} {    # Figure out what this machine's IP address is.
    global myip
    set tss [socket -server tserv $port]
    set ts2 [socket [info hostname] $port]
    set myip [lindex [fconfigure $ts2 -sockname] 0]
    close $tss
    close $ts2
    if [info exists ts] {close $ts}
    return $myip
}

proc disconnect {s} {
    close $s
    # set $s -1
    log "disconnected (closed $s).\n"
}

proc connect {{toip {}} {toport {}}} {
    global rems remip myport icanconnect
    if {$rems != -1} {
        log "Connect attempt while already connected: ignored"
        return
        disconnect $rems
        set rems -1
    }
    if {[catch {set rems [socket $remip $myport]}] != 0} {
        set rems -1
        log "Attempt to connect to $remip failed.\n"
        return
    }
    fileevent $rems readable {
        global rems
        set in [gets $rems]
        parse_in $in
    }
    set icanconnect 1  ;# appearently we could initiate a connection with the addressee
}

proc send {{line \n}} {
    global rems
    if {$rems == -1} {return}
    puts $rems $line
    flush $rems
}

proc new_serv_address {} {
    global myss myport rems
    if {$rems != -1} {
        log "Attempt to change server IP address while already connected, ignored\n"
        return
    }
    if {$myss != -1} {
        close $myss
        log "Closed server socket $myss\n"
        set myss -1
    }
    if {[catch {set myss [socket -server serv $myport]}] == 0} {
        global icanconnect
        log "Now listening with $myss at port $myport\n"
        set icanconnect 0
    } else {
        set myss -1
        log "server address already in use, use active connect.\n"
    }
}

# send routines, with the ability to initiate the socket connection 
# from either the send or receive side.
# that is, either one of two connected pcom's can initiate the connection 
# tp transfer a file a certain direction, regardless of which 
# pcom did the file transfer request. (firewall stuff))

proc file_serv_send {s ip t} {
    global filess fileso filed
    set fileso $s
    close $filess        ;# no longer needed
 
     fconfigure $filed -translation binary
     fconfigure $fileso -translation binary
     set n [fcopy $filed $fileso]
     close $filed
     close $fileso
     log ", Ready ($n bytes).\n"
    
}
proc file_serv_receive {s ip t} {
    global filess fileso filed
    set fileso $s
    close $filess        ;# no longer needed
    
    fconfigure $filed -translation binary
    fconfigure $fileso -translation binary
    set n [fcopy $fileso $filed]
    close $fileso
    close $filed
    log ", Ready ($n bytes).\n"
}

proc send_file {localname port {ip {}} } {
    global filess fileport filed fileso
    if {[catch {set filed [open $localname r]}] != 0} {
        log "Unable to open file $localname to send.\n"
        return ERROR
    }
    if {$ip == {}} {
        set fileport $port
        if {[catch {set filess [socket -server file_serv_send $port]}] != 0} {
            log "Unable to open file server socket (port $port).\n"
            return ERROR
        }
        log "Transfering file $localname "
    } else {
        set fileport $port
        if {[catch {set fileso [socket $ip $port]}] != 0} {
            close $filed
            log "Unable to open connection to $ip, port $port for file tranfer.\n"
            return ERROR
        }
        fconfigure $filed -translation binary
        fconfigure $fileso -translation binary
        log "Transfering file $localname "
        set n [fcopy $filed $fileso]
        close $filed
        close $fileso
        log ", Ready ($n bytes).\n"
    }
}

proc receive_file {localname port {ip {}} } {
    global filess fileport filed fileso
    if {[catch {set filed [open $localname w]}] != 0} {
        log "Unable to open file $localname to receive.\n"
        return
    }
    if {$ip == {}} {
        set fileport $port
        if {[catch {set filess [socket -server file_serv_receive $port]}] != 0} {
            log "Unable to open file server socket (port $port).\n"
            return ERROR
        }
        log "Transfering file $localname "
    } else {
        set fileport $port
        if {[catch {set fileso [socket $ip $port]}] != 0} {
            close $filed
            log "Unable to open connection to $ip, port $port for file tranfer.\n"
            return ERROR
        }
        fconfigure $filed -translation binary
        fconfigure $fileso -translation binary
        log "Transfering file $localname "
        set n [fcopy $fileso $filed]
        close $fileso
        close $filed
        log ", Ready ($n bytes).\n"
    }
}

proc do_receive_file {rdir file ldir} {
    global myip remip icanconnect
    set recport 305                      
                              # This could be any free port which is available
    if {$icanconnect == 1} {
        send "DO_SENDFILE [file join $rdir $file] $recport"
        receive_file [file join $ldir $file] $recport $remip
    } else {
        receive_file [file join $ldir $file] $recport
        send "DO_SENDFILE [file join $rdir $file] $recport $myip"      
    }
}

proc do_send_file {ldir file rdir} {
    global myip remip icanconnect
    set recport 305   
                             # to get files through firewalls, use 80 ... (also see above)
    if {$icanconnect == 1} {
        send "DO_RECFILE [file join $rdir $file] $recport"
        send_file [file join $ldir $file] $recport $remip
    } else {
        send_file [file join $ldir $file] $recport
        send "DO_RECFILE [file join $rdir $file] $recport $myip"      
    }
}


proc make_ui {} {
    global remip intext myport
 #   label .lip -textvar myip
 #   pack .lip -side top -anchor n -expand n -fill none
    frame .fb
    pack .fb -side top -anchor n -expand n -fill x
    button .fb.bquit -text Quit -command quit
    pack .fb.bquit -side right -anchor ne -fill none -expand n
    label .fb.lstate -textvar state
    pack .fb.lstate -side left -anchor nw -fill none -expand n
    button .fb.bna -text "New Address" -command new_serv_address
    pack .fb.bna -side left -anchor nw -fill none -expand n
    button .fb.bcl -text "Close Connection" -command \
         {global rems; send "DO_CLOSECONTROL \n"; disconnect $rems; set rems -1 }
    pack .fb.bcl -side left -anchor nw -fill none -expand n
    frame .fcl
    frame .fc1
    frame .fc2
    frame .fc3
    pack .fcl -side top -anchor n -expand n -fill x
    pack .fc1 -side top -anchor n -expand n -fill x
    pack .fc2 -side top -anchor n -expand n -fill x
    pack .fc3 -side top -anchor n -expand n -fill x
    set remip 127.0.0.1
    entry .fc1.eip -textvar remip -width 14
    entry .fc2.eport -textvar myport -width 14
    entry .fcl.elip -textvar myport -width 14
    label .fc1.lip -text "Remote IP address:" -width 15 -anchor e
    label .fc2.lport -text "Port:" -width 15 -anchor e
    label .fcl.llip -text "Local server port" -width 15 -anchor e
    button .fc3.connect -text Connect -command connect
    pack .fcl.llip -side left -expand n -fill none
    pack .fcl.elip -side left -expand n -fill none
    pack .fc1.lip -side left -expand n -fill none
    pack .fc1.eip -side left -expand n -fill none
    pack .fc2.lport -side left -expand n -fill none
    pack .fc2.eport -side left -expand n -fill none
    pack .fc3.connect -side left -expand y -fill x
 
    text .tcom -width 40 -height 4
    entry .ecom -textvar intext
    pack .ecom -side top -anchor n -fill x -expand y
    pack .tcom -side top -anchor n -fill both -expand y
    bind .ecom <Return> {
        send $intext; .tcom insert end "LOCAL: $intext\n";
        .tcom see end
        set intext ""
    }
    make_fileui
}

proc make_fileui {} {
    toplevel .f
    wm title .f "Remote Dir"
    listbox .f.ld; listbox .f.lf
    pack .f.ld .f.lf -side left -expand y -fill both
    entry .f.ed -textvar crdir
    entry .f.ep -textvar crpat
    pack .f.ed .f.ep 
    button .f.bu -text Update -command \
         {global crdir crpat; send "DO_LS $crdir $crpat"}
    button .f.bdu -text Up
    pack .f.bu .f.bdu -fill x
    .f.bdu conf -command { 
        set s [file split $crdir]
        if {[llength $s] > 1} {
            set up [eval file join [lrange $s  0 [expr [llength $s]-2] ] ]
            set crdir $up
        }
        .f.bu invoke
    }
    bind .f.ld <Double-Button-1> {
        global crdir
        set crdir [eval file join $crdir [selection get]]
        .f.bu invoke
    }   
    bind .f.lf <Double-Button-1> {
        do_receive_file $crdir [selection get] $cldir
    }
    
 
 # local file windows
    toplevel .fl
    wm title .fl "Local Dir"
    listbox .fl.ld; listbox .fl.lf
    pack .fl.ld .fl.lf -side left -expand y -fill both
    entry .fl.ed -textvar cldir
    entry .fl.ep -textvar clpat
    pack .fl.ed .fl.ep 
    button .fl.bu -text Update -command \
         {do_local_ls }
    button .fl.bdu -text Up
    pack .fl.bu .fl.bdu -fill x
    .fl.bdu conf -command { 
        set s [file split $cldir]
        if {[llength $s] > 1} {
            set up [eval file join [lrange $s  0 [expr [llength $s]-2] ] ]
            set cldir $up
        }
        .fl.bu invoke
    }
    bind .fl.ld <Double-Button-1> {
        global cldir
        set cldir [eval file join $cldir [selection get]]
        .fl.bu invoke
    }
    bind .fl.lf <Double-Button-1> {
        do_send_file $cldir [selection get] $crdir
    }
}

proc do_local_ls {} {
    global cldir clpat
        set olddir [pwd]; set dirs {}; set files {}
 #      puts [pwd]
        if {[catch "cd $cldir"] != 0} {
            cd $olddir
            log "Local ls: $cldir $pattern (Error: non-existent dir)\n"
        }
 #      puts [pwd]
        foreach i [glob $clpat] {
            if [file exists $i] {
                if [file isdir $i] {
                    lappend dirs $i
                } else {
                    lappend files $i
                }
            }
        }
        .fl.ld del 0 end ; .fl.lf del 0 end
        foreach i $dirs {.fl.ld insert end $i}
        foreach i $files {.fl.lf insert end $i}
        
        cd $olddir
 #      puts "$cldir $clpat {$dirs} {$files}"
}

proc close_all {} {
    global myss rems
    if {$myss != -1} {close $myss; set myss -1}
    if {$rems != -1} {close $rems; set rems -1}
}

proc quit {} {
    close_all
    log "Quit: all sockets closed.\n"
    # this was for certain particular reasons, use main window close to realy quit.
}


#
# main
#

history keep 1000   
                          # I always do this, but it makes not much sense  
# console show      # without this command of course (it seems).
init
make_ui

The program works fine enough, but doesn't get my 'free of bugs' approval symbol: it hangs when file transfer fails for some reason, and Quit is just to close all sockets, and merely requires a new connection or new address (also when it is the same) to make the program work again. Hangup errors, which are not generated normally except by transfer errors for network reasons can make history become very (I mean like hundreds of megs) big, and cpu time all eaten waiting for a non active connection.

NOTE WELL: File transfer works without any asking for confirmation by double clicking files either locally or remotely, and file are 'overwritten' without confirmation, too !!!

You can start two copies of the program by double clicking on the program tcl file twice (or what your os of choice prescribes), give them address 'localhost' or '127.0.0.1' or your machines IP address, will note that one complains that the default port 300 is taken already as serving port on that machine, press that ones' connect button, to get connected.

Once connected, which is logged in the bottom window, typing in the one line entry and pressing return will copy that line to the other end and show up in the middle window preceded by 'remote: '.

Each pcom has a local and remote file window, which show files as it seems logical, use the update button to refresh the most left directory list and the middle files list box in either file window. NOtice that through the connection, remote files show up, and can be downloaded by FIRST choosing the right directory with the local window. Double clicking in the left list changes directory, the up button does what its name suggests and an update.

When double clicking a file (the middle or right list in the file windows) it gets transfered straight away, either from the local machine to the remote machine, or vice versa. Where it is double clicked, it is taken from.

I got around using this again because I (positively so) could deal with a local area network, where it is simply the easiest way to get message and som efiles over the net without special or brand specific tools like talk ftp, irc/im remote shells or what else.

I wanted to set up a camera and audio connection, and use windows media encoder because it happens to support the equipment at hand, and it is good to have some communication and way to download some things before that works as a good communication link. No windows file sharing or any speical services are needed to make pcom work.

TV 2003-06-16: I just pasted the code myself and found out that in certain conditions errors were 'thrown' because I used comments symbols right after a variable assignment statement. I think that is corrected now.

While I was thinking, it occured to me it may be a good idea to have a Secure code method thinking sort of like how one can easily oversee whether some code is guaranteed not to mess up a system for sure within reasonable limits.

TV: On how to find my own IP address It was noted that myip, the function which at initialisation time lists the local ip address in the log window, can be wrong. I thus far had no problem with it, but now I found than linux on a local network which I bridge to the internet indeed it doesn't work. And even that user permissions can be such that opening a server socket is not permitted at all, which does not overall make it possible to run pcom as long as the other side can, but it does throw an error.

Also, when the connection is uncommonly broken, for instance when one parties station slips into standby, certain errors make a long list of 'Remote' appear, which eventually eats up all memory and processor cycles...

I've looked into it earlier (I made it years ago) and think it could be solved by catching eof or socket error condition, which is possible from a certain tcl version onward. Or some checking, I'll see, I remember I didn't want to change the protocol, which I sort of demand to be able to send anything, even empty lines, without much processing.

TV 2003-10-13: Due to unknown reasons I found there are some unniceties/plain errors in the code, and I make an newer version which some people might find handy to play with. It allows only connections from other pcoms (or othe programs using its protocol) which originate from a local network (IP address starting with 192.168 as it is programmed now), and simply rejects others with a log message, which is not just luxury on a constant on internet connection, see the 'serv' function. Also this version opens windows under the path
.pc

which makes it easier to load into another application, such as bwise, with which it currently (as I last time checked) has no namespace clashes, that is: the global namespaces has no overlap (corrected 'connect' proc to pcconnect, oct 14 03). When nothing goes wrong with the file transfer scokets, it would seem the 'hanging' problem when the other parties disappears without 'close' notice, is solved, and pcom will simply log the other end has closed the connection. I tried it on linux and windows, the only issue being that starting file transfer on the linux side with a windows pcom on the other end based on my self compiled cygwin/X+windows version having its windows on the linux machine generates some errors. Will look into.

'Pcom local' can be downloaded here:
   http://82.171.148.176/Bwise/pcomlbf.tcl

Pcom can also be used for remote control and remote session management issues, like starting and killing applications, see remote execution using tcl and Pcom.

Known bugs/'issues':

  • Most older versions of pcom 'hang' in a bad way on at least recent tcl/tk versions, because the socket isn't noticing end of files, and uses all processor time and after a while all memory including swap space to read empty lines full time into the log window.
  • (re) define the (global myport) standard socket and within two file transfer functions the file transfer port numbers to make sure unix/linux doesn't have a problem finding those ports freely available.
  • It seems also on later versions (like mentioned above) the file transfer mechanism messes up after an error has occured, though it can be made to work through firewalls (define port as something handy and make sure the connection is built up in the 'right' direction (which pcom tries to figure out) ... Preferably restart after a file transfer error, otherwise a socket remains open, and the file open command makes a sometimes unremovable empty file (as long as that running pcom isn't quit) and the next tranfer might end up in the wrong file. When there is no error, things work fine.
  • the two port entries aren't doing something interestingly different currently
  • some logging is one-sided or unneatly formatted
  • large file tranfer makes the app unresponsive till the end
  • First at least one line or command must pass the connection before the fail safe disconnect works (my God...)
  • Empty directories and filenames with spaces in then (on windows at least) make the file browsers fail beyond help
  • No confirmation for file transfer, just the double-click starts it, and there is also no protection for file overwriting at all, also not when the transfer fails.
  • The latest version messes up because the automatic detection of end-of-control-connection and the close buttons message to do the same get in eachothers way and generate an error.
  • I noticed that between a linux and windows machine, file transfer when initiated from the linux machine doesn't work in half the cases.
  • During the setup of the file transfer socket connection, a short period exists where a agressive (short repetition interval) access to the file transfer server socket could be granted to another party, leaving you either with a security hole for that file, or an overwrite of the file with unknown (possibly bulky) data.

Some of these bugs used to be a whole lot less annoying or not present when I was working with windows 95 / Novell machines, and tcl version numbers were years lower.

One cool day, I'll tell 'm all what information technology guys over a mere few decades were able to mess up in a few decades, and in how many shades of socket-shadow... Progress, yeah right! Please, no lightbulb jokes [2] (server powered in part by tcl, when memory serves me well) ..

Please add you own bug reports/comments here or elsewhere

Home assignment: how can you make use of the DO_TCL command on a friendly connection to figure out what the other party has typed lately while possibly being unconnected (on short line, use end-5l ..) ?

TV 2005-08-23: I've added two buttons to a pcom I use on a local net because its a safe and small and handy and direct. I wanted without a ssh server or so to get remote xwindows (from cygwin) running and the above is solved to peek at the other ends history after restarts or connection interupts.
40,41d39
<  set xpathset 0
< 
263,266d260
<       if [eof $rems] {
<          disconnect $rems
<        set rems -1
<       }
448,462d441
<    # for Xwindows remote commands
<    button .pc.fc3.xwindows -text Xwindows -command {
<       if {$xpathset == 0} {
<          send {DO_TCL uplevel #0 {append env(PATH) {;c:\cygwin\bin;c:\cygwin\usr\X11R6\bin;}}}
<          global env
<          append env(PATH) {;c:\cygwin\bin;c:\cygwin\usr\X11R6\bin;}
<          exec xterm -fn '-adobe-courier-*-r-*-*-*-140-*-*-*-*-*-*' -rightbar -sb -fg white -bg black -title inez -geom 80x6-91+91 -display localhost:0 &
<          exec xterm -fn '-adobe-courier-*-r-*-*-*-140-*-*-*-*-*-*' -rightbar -sb -fg white -bg black -title inez -geom 80x6-91+423 -display localhost:0 &
<          set  xpathset 1
<       }
<       send {DO_TCL exec xterm -display inez.mshome.net:0.0 -fn -*-courier-*-r-*-*-15-*-*-*-*-*-*-* -bg black -fg lightgreen -sb -rightbar  -title benee -geom 80x5-91+250 &}
<    }
<    button .pc.fc3.peek -text Peek -command {
<       send {DO_TCL pcsend [.pc.tcom get end-5l end]}
<    }
470,471d448
<    pack .pc.fc3.xwindows -side left -expand y -fill x
<    pack .pc.fc3.peek -side left -expand y -fill x
602,608d578
< wm iconify .
< wm iconify .pc.f
< wm iconify .pc.fl
< wm geom .pc +0+543
< 
< update
< catch {.pc.fc3.connect invoke}

The diff is with the pcomlbf.tcl version.